SPC Performance

SPC Performance 05-07 Ford Five Hundred / 08-09 Ford Taurus Rear Camber Ball Joint

SKU 67690

MPN spc67690

$101.26 · Available to order

SPC Performance 05-07 Ford Five Hundred / 08-09 Ford Taurus Rear Camber Ball Joint

Use this adjustable ball joint to get +-1.25deg camber change on Ford's D3 Platform AWD vehicles like the Five Hundred, Taurus, Sable, MKS, and TaurusX from 2005-2010. Many of these vehicles run negative camber in the rear, but there is no factory correction. To get change, you will need to press the OE ball joint out of the knuckle and replace it with the adjustable offset stud design from SPC. Once loosely reassembled, you will be able to easily turn the 8mm hex on the stud and watch camber change. Torque down the nut and your adjustment is locked in. SPC recommends either a shop press or our 72509 ball joint press with a short receiver to press out the OE ball joint and press in the adjustable ball joint. On this adjustable ball joint SPC uses hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available. California Residents WARNING

Confirmed vehicle fitment
YearsMakeModelSubmodelDrive
2005–2007FordFreestyleSEL—
2008–2009MercurySablePremier—
2008–2009FordTaurus XSEL—
2008–2009FordTaurus XEddie Bauer—
2008–2009FordTaurusSEL—
2008–2009MercurySableBase—
2005–2007FordFive HundredSEL—
2005–2007MercuryMontegoLuxury—
2008–2009FordTaurus XLimited—
2009FordTaurusSE—
2005–2007FordFreestyleLimited—
2005–2007MercuryMontegoPremier—
2005–2006FordFreestyleSE—
2005–2006FordFive HundredSE—
2008–2009FordTaurusLimited—
2005–2007FordFive HundredLimited—
Specifications
CategorySuspension
Sub-CategoryBall Joints
UPC082642676904
CARB ApprovedYes
Prop 65 WarningY
Special OrderYes
Weight1 lb
Dimensions (L×W×H)4.75 × 3.88 × 3.38 in